Ⅰ. FUNCTION
(1) PRECISE FRAME DRIVE
TO SECURE QUIETER AND FINER EMBROIDERY, USE SPECIALLY DEVELOPED
STEPPING(PULSE) MOTORS FOR IT.
(2) TAKE-UP LEVER GUARD
ESPECIALLY DESIGNED TO AVOID THREAD ENTANGLING AND THE THREAD CAST OFF.
(3) INDIVIDUAL TENSION BASE
TO OPTIMIZE THREAD TENSION, SPECIALLY PURPOSED TO MOVE THE TENSION BASE
WITH THE NEEDLE BAR CASE SIMULTANEOUSLY DURING COLOR CHANGES.
(4) MEMORY CAPACITY
CAN STORE UP TO 99 DESIGNS.
UNLIMITED MEMORY CAPACITY
(5) ROTATING DESIGN
FROM 1˚ UP TO 359˚ AVAILABLE. CAN BE ADJUSTED BY 1˚ .
(6) ENLARGE/REDUCE THE PATTERN SIZE
10% - 200% AVAILABLE. CAN BE ENLARGED/REDUCED BY 1˚ BOTH VERTICALLY AND HORIZONTALLY.
(7) SIMPLIFIED NEEDLE BAR SHIFT LEVER
EVEN ONE NEEDLE BAR CAN BE CHOSEN FROM DISPLAY OPERATING BOX, LOWERED AND
RAISED DURING OPERATION TO FIND PINPOINTS FOR HIGH QUALITY EMBROIDERY.
(8) NON-STOP REPEATING THE PATTERN(AUTOMATIC REPEAT)
CAN REPEAT UP TO 99 DESIGNS BY X OR Y DIRECTION ALONG WITH MIRROR
IMAGE CONVERSION. A PATTERN CAN BE AUTOMATICALLY REPEATED BOTH
VERTICALLY AND HORIZONTALLY.
(9) HOME RETURN BY AUTO/MANUAL : EASY TO MAKE APPLIQUE.
(10) ORIGIN RETURN AND FRAME BACK MEMORY
THE FRAME CAN BE RETURNED TO THE DESIGN STARTING POINT, ALSO BACKED UP
TO THE DESIGNATED STITCH WHEN THE MACHINE IS STOPPED BY A THREAD
BREAKS, A BOBBIN RUNS OUT, OUT OF ELECTRICITY, OR ETC. SINGLE HEAD OPERATION
TO RE-STITCH AND AUTO-MEND THE MISSING STITCHES CAN BE PERFORMED.
(11) SEPARATED HEAD DRIVE SHAFT
THE HEAD DRIVE SHAFT IS SET APART FROM HEAD PART AND POSITIONED AT THE BACKSIDE OF BRIDGE. IT BRINGS
VIBRATION FREE AND HIGH QUALITY OPERATIONS BY SHORTENING THE DISTANCE BETWEEN NEEDLE BAR AND BRIDGE.
(12) SCREEN TYPE OPERATING BOX
THE OPERATING BOX ENABLES USERS, EVEN A BEGINNER TO OPERATE THE MACHINES EASILY.
- INDICATING ERROR
- INDICATING RPM (SPEED)
- CAN USE OTHER FORMAT (EX. TAJIMA, BARUDAN, ZSK, ETC...)
(13) THREAD CUTTING BY AUTO/MANNUAL.
(14) STITCH PROCESSOR AVAILABLE. (FROM 50% UP TO 200% ENLARGE/REDUCE OF THE STITCHES'
DENSITY AND DISTANCE.
(15) MIX/JOIN WITH OTHER DESIGN TO EDIT NEW OR MODIFY THE ORIGINAL DESIGN PATTERN.
(16) MAKING PUNCHING THE DESIGN USING SCANNING ON P.C.(OPTION)
(17) REMOTE CLINIC BY TELEPHONE LINE ON P.C.(OPTION)
(18) UTC(UNDER THREAD CONTROLLER) BY SENSOR.(OPTION)
(19) THREAD TENSION CONTROL ACCORDING TO THE MATERIAL TO BE USED(LEATHER,
KNITS, MASH NET, VARIOUS TEXTILES, ETC.)
(20) AUTOMATIC THREAD TRIMMING & HOLDING SYSTEM
(21) POWER FAILURE CONTROL MEASURES
CONTINUE TO OPERATE THE MACHINE AFTER POWER FAILURE WITHOUT BEING
ANNOYED BY MIS-POSITION.
(22) NOISE REDUCTION SPECIFICATION(FACTORY OPTION)
VARIOUS NOISE REDUCTION MECHANISMS CAN REDUCE MACHINE NOISE
DRASTICALLY AND REALIZE COMFORTABLE ENVIRONMENT.
(23) AUTOMATIC LUBRICATION SYSTEM(FACTORY OPTION)
PROPER QUANTITY OF LUBRICATION TO HEADS AND ROTARY HOOKS IS DONE
AUTOMATICALLY. THIS NEW LABOR-SAVING SERIES HELPS YOU IMPROVE
PRODUCTIVITY AND APPROACH TO MAINTENANCE FREE OPERATION.
II. TECHNICAL DATA
STITCHING PITCH : 0.1 - 12.7MM
FRAME TO NEEDLE POINT : 27.6MM
CAPACITY(SPEED) : 250-1200RPM.
MAIN MOTOR : AC SERVO MOTOR 900W x 1
X,Y AXIS MOTOR : SERVO MOTOR
GEARED MOTOR : AC15W
ELECTRICITY : 3P 220V, 380V(50/60HZ) , 1P 110V, 220V(50/60HZ)
ELECTRICITY CONSUMPTION : 1.5KW
RATING ELECTRICITY : 3KVA
* The above specifications are changeable subject to head q'ties.
III. FEATURES
BODY FRAME
HEAD
NEEDLE BASE
HOOK BASE
PEAK SOLENOID
TRIMMING BASE
HOLDER FRAME, CLIPS
TABLE
CPU BOX(CONTROL BOX) AND DIGITAL MONITOR
X,Y L.M. GUIDER
COLOR CHANGE BASE
TENSION BASE
MOTORS(A.C. SERVO MOTOR AND GEARED MOTOR)
BOBBIN WINDER
TOOL SET
STANDARD ACCESSARY (SPARE PART)
MANUAL BOOK AND PART LIST
Ⅳ. OPTION DEVICE
CHEESE WINDER
PERSONAL COMPUTER
OUR SPECIAL SOFTWARE(PUNCHING) PROGRAM.
UTC(UNDER THREAD CONTROLLER)
SPECIAL SHAPE OF FRAME SET(48 SERIES)
BORING DEVICE
HIGH-SPEED CORDING DEVICE(850RPM)
SEQUIN(SPANGLE) DEVICE(1200RPM)/DOUBLE SEQUIN DEVICE
TWIN SEQUIN DEVICE
COILING DEVICE
AUTOMATIC LUBRICATION SYSTEM(FACTORY OPTION)
NOISE REDUCTION SPECIFICATION(FACTORY OPTION)
JUMBO ROTARY HOOK(FACTORY OPTION)
EVEN/ODD HEAD SELECT SWITCH
MAKING PUNCHING THE DESIGN USING SCANNING ON P.C.
DUST COLLECTOR(DUCT SYSTEM ON THE M/C)(FACTORY OPTION)
LASER CUTTING SYSTEM
CROSS START POINT INDICATOR BY HALOGEN LAMP
RULER (MEASUREMENT ON THE PANTOGRAPH)
MICRO STEPPING(PULSE) MOTOR/MICRO STEPPING DRIVER(48,000 PULSE INSTEAD OF 1,000 PULSE)
REMARKS
We reserve the right to change the specification for improvement without previous notice.
Speeds vary with embroidery conditions.
Embroidery space of the wide cap frame varies depending on a model and/or caps to be used.
(1) PRECISE FRAME DRIVE
TO SECURE QUIETER AND FINER EMBROIDERY, USE SPECIALLY DEVELOPED
STEPPING(PULSE) MOTORS FOR IT.
(2) TAKE-UP LEVER GUARD
ESPECIALLY DESIGNED TO AVOID THREAD ENTANGLING AND THE THREAD CAST OFF.
(3) INDIVIDUAL TENSION BASE
TO OPTIMIZE THREAD TENSION, SPECIALLY PURPOSED TO MOVE THE TENSION BASE
WITH THE NEEDLE BAR CASE SIMULTANEOUSLY DURING COLOR CHANGES.
(4) MEMORY CAPACITY
CAN STORE UP TO 99 DESIGNS.
UNLIMITED MEMORY CAPACITY
(5) ROTATING DESIGN
FROM 1˚ UP TO 359˚ AVAILABLE. CAN BE ADJUSTED BY 1˚ .
(6) ENLARGE/REDUCE THE PATTERN SIZE
10% - 200% AVAILABLE. CAN BE ENLARGED/REDUCED BY 1˚ BOTH VERTICALLY AND HORIZONTALLY.
(7) SIMPLIFIED NEEDLE BAR SHIFT LEVER
EVEN ONE NEEDLE BAR CAN BE CHOSEN FROM DISPLAY OPERATING BOX, LOWERED AND
RAISED DURING OPERATION TO FIND PINPOINTS FOR HIGH QUALITY EMBROIDERY.
(8) NON-STOP REPEATING THE PATTERN(AUTOMATIC REPEAT)
CAN REPEAT UP TO 99 DESIGNS BY X OR Y DIRECTION ALONG WITH MIRROR
IMAGE CONVERSION. A PATTERN CAN BE AUTOMATICALLY REPEATED BOTH
VERTICALLY AND HORIZONTALLY.
(9) HOME RETURN BY AUTO/MANUAL : EASY TO MAKE APPLIQUE.
(10) ORIGIN RETURN AND FRAME BACK MEMORY
THE FRAME CAN BE RETURNED TO THE DESIGN STARTING POINT, ALSO BACKED UP
TO THE DESIGNATED STITCH WHEN THE MACHINE IS STOPPED BY A THREAD
BREAKS, A BOBBIN RUNS OUT, OUT OF ELECTRICITY, OR ETC. SINGLE HEAD OPERATION
TO RE-STITCH AND AUTO-MEND THE MISSING STITCHES CAN BE PERFORMED.
(11) SEPARATED HEAD DRIVE SHAFT
THE HEAD DRIVE SHAFT IS SET APART FROM HEAD PART AND POSITIONED AT THE BACKSIDE OF BRIDGE. IT BRINGS
VIBRATION FREE AND HIGH QUALITY OPERATIONS BY SHORTENING THE DISTANCE BETWEEN NEEDLE BAR AND BRIDGE.
(12) SCREEN TYPE OPERATING BOX
THE OPERATING BOX ENABLES USERS, EVEN A BEGINNER TO OPERATE THE MACHINES EASILY.
- INDICATING ERROR
- INDICATING RPM (SPEED)
- CAN USE OTHER FORMAT (EX. TAJIMA, BARUDAN, ZSK, ETC...)
(13) THREAD CUTTING BY AUTO/MANNUAL.
(14) STITCH PROCESSOR AVAILABLE. (FROM 50% UP TO 200% ENLARGE/REDUCE OF THE STITCHES'
DENSITY AND DISTANCE.
(15) MIX/JOIN WITH OTHER DESIGN TO EDIT NEW OR MODIFY THE ORIGINAL DESIGN PATTERN.
(16) MAKING PUNCHING THE DESIGN USING SCANNING ON P.C.(OPTION)
(17) REMOTE CLINIC BY TELEPHONE LINE ON P.C.(OPTION)
(18) UTC(UNDER THREAD CONTROLLER) BY SENSOR.(OPTION)
(19) THREAD TENSION CONTROL ACCORDING TO THE MATERIAL TO BE USED(LEATHER,
KNITS, MASH NET, VARIOUS TEXTILES, ETC.)
(20) AUTOMATIC THREAD TRIMMING & HOLDING SYSTEM
(21) POWER FAILURE CONTROL MEASURES
CONTINUE TO OPERATE THE MACHINE AFTER POWER FAILURE WITHOUT BEING
ANNOYED BY MIS-POSITION.
(22) NOISE REDUCTION SPECIFICATION(FACTORY OPTION)
VARIOUS NOISE REDUCTION MECHANISMS CAN REDUCE MACHINE NOISE
DRASTICALLY AND REALIZE COMFORTABLE ENVIRONMENT.
(23) AUTOMATIC LUBRICATION SYSTEM(FACTORY OPTION)
PROPER QUANTITY OF LUBRICATION TO HEADS AND ROTARY HOOKS IS DONE
AUTOMATICALLY. THIS NEW LABOR-SAVING SERIES HELPS YOU IMPROVE
PRODUCTIVITY AND APPROACH TO MAINTENANCE FREE OPERATION.
II. TECHNICAL DATA
STITCHING PITCH : 0.1 - 12.7MM
FRAME TO NEEDLE POINT : 27.6MM
CAPACITY(SPEED) : 250-1200RPM.
MAIN MOTOR : AC SERVO MOTOR 900W x 1
X,Y AXIS MOTOR : SERVO MOTOR
GEARED MOTOR : AC15W
ELECTRICITY : 3P 220V, 380V(50/60HZ) , 1P 110V, 220V(50/60HZ)
ELECTRICITY CONSUMPTION : 1.5KW
RATING ELECTRICITY : 3KVA
* The above specifications are changeable subject to head q'ties.
III. FEATURES
BODY FRAME
HEAD
NEEDLE BASE
HOOK BASE
PEAK SOLENOID
TRIMMING BASE
HOLDER FRAME, CLIPS
TABLE
CPU BOX(CONTROL BOX) AND DIGITAL MONITOR
X,Y L.M. GUIDER
COLOR CHANGE BASE
TENSION BASE
MOTORS(A.C. SERVO MOTOR AND GEARED MOTOR)
BOBBIN WINDER
TOOL SET
STANDARD ACCESSARY (SPARE PART)
MANUAL BOOK AND PART LIST
Ⅳ. OPTION DEVICE
CHEESE WINDER
PERSONAL COMPUTER
OUR SPECIAL SOFTWARE(PUNCHING) PROGRAM.
UTC(UNDER THREAD CONTROLLER)
SPECIAL SHAPE OF FRAME SET(48 SERIES)
BORING DEVICE
HIGH-SPEED CORDING DEVICE(850RPM)
SEQUIN(SPANGLE) DEVICE(1200RPM)/DOUBLE SEQUIN DEVICE
TWIN SEQUIN DEVICE
COILING DEVICE
AUTOMATIC LUBRICATION SYSTEM(FACTORY OPTION)
NOISE REDUCTION SPECIFICATION(FACTORY OPTION)
JUMBO ROTARY HOOK(FACTORY OPTION)
EVEN/ODD HEAD SELECT SWITCH
MAKING PUNCHING THE DESIGN USING SCANNING ON P.C.
DUST COLLECTOR(DUCT SYSTEM ON THE M/C)(FACTORY OPTION)
LASER CUTTING SYSTEM
CROSS START POINT INDICATOR BY HALOGEN LAMP
RULER (MEASUREMENT ON THE PANTOGRAPH)
MICRO STEPPING(PULSE) MOTOR/MICRO STEPPING DRIVER(48,000 PULSE INSTEAD OF 1,000 PULSE)
REMARKS
We reserve the right to change the specification for improvement without previous notice.
Speeds vary with embroidery conditions.
Embroidery space of the wide cap frame varies depending on a model and/or caps to be used.
TECHNICAL DATA
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |  |
1F., Sumac Bldg., 220-1, Siksa-Dong, Ilsan-Dong-Gu, Goyang-City, Kyungki, 410-821, R.O.KOREA.
Tel : +82 31 905 9569 Fax : +82 31 905 9568
e-mail : sumac1992@korea.com sumac1992@gmail.com msn : sumac1992@hotmail.com
web : www.nanoteckworld.com , www.sumac1992.com
Copy right to Sumac Co., Ltd., All rights reserved.
Tel : +82 31 905 9569 Fax : +82 31 905 9568
e-mail : sumac1992@korea.com sumac1992@gmail.com msn : sumac1992@hotmail.com
web : www.nanoteckworld.com , www.sumac1992.com
Copy right to Sumac Co., Ltd., All rights reserved.